INdoor WiFi signal booster; 2. Frequency 2.4GHz; Power 10W(40dBm); 3. Max. 5000 square meters suitable; 4. Work in most country.
Full power, easy installation and operation; Strengthen radio signal to Increase the effective range and coverage area for Wi-Fi communication; Save wiring costs, easily build a wireless infrastructure for home or business use; Make broadband wireless application in possible coverage.
WiFi indoor Signal Booster 10W 2.4GHz 40dBm is an indoor solution 10W bi-direction Booster designed for 2.4GHz wireless LANs. This unit comes with an easy plug-and-play installation, which works together with an indoor Wireless Access Point to improve its operation range and performance. In certain conditions the unit is able to double the range of the wireless device.The WiFi amplifier extends signal range and can eliminate the use of an additional radio with its associated data line, power outlet, signal interference, and setup headaches.
WiFi indoor Signal Booster 10W 2.4GHz 40dBm is the fast and easy way to extend your signal range in any environment. This wireless signal repeater is ideal for use with 2.4 GHz frequency hopping or direct sequence spread spectrum radio modems and 5000 MBps IEEE802.11b/g/n devices. The WiFi amplifiers increase range by providing transmit gain as well as low-noise receive gain. This receive gain increase the receive sensitivity of wireless LAN Access point.Full output power of 10W is achieved with only 43 mW input into the WiFi signal booster.
Brand new and high quality.Low noise receives gain.Signal activity LED indicates. High Gain, High Value, High Performance. Plug-and play, Easy installation, no driver needed. Ideal for increase the 2400-2500 MHz frequency devices. Increase the effective range and coverage area of your WiFi network. Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow. The amplified wireless signal may even penetrate complex environments with many walls and obstacles. Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g and 802.11n (2.4 GHz mode only).
Operating range : 2400~2500MHz
Channel width: 20Mhz&40Mhz
Supported standards: IEEE 802.11b/g/n
Operation mode: Bi-directional, half-duplex, time division duplex
Connector type: N-K female
Output power: 10W (43dBm)
Input power: 0 ~ 27dBm
Transmit gain: 25dB
Receiver gain: ≤22dB
Noise figure: ≤3.5dB typical
Frequency response: ±1dB over operating range
Power adapter: 24V/2A DC, 100~240V
Operating temperature: -25°C to +55°C
Operating humidity: Up to 75% relative humidity
Material: Cast aluminum
LED light: Power status / activity status LED
Booster weight: 740g
Booster size: 15.2 x 13.1 x 2.6cm
Package Weight: 1.4KG
1 x SH24Gi10W
1 x power supply