Home Security Rainproof Wireless WiFi Smartphone Remote Video Camera Doorbell

Operation--Connecting to Network
1).Plug the power wire cable into the WIFI video door phone and waiting for 20s until the index lighting start flashing and alert:Welcome to smart Home and then wait 10s.
2).Press the doorbell button and hold for 5s, release the button ,product will alert:
SYSTEM ENTER NETWORK CONFIGUALTION MODE,if not alert, please press the doorbell button again for 5s untill the alert on.
3). Connect to the WIFI hot point ID:BELL-XXXXXXX with your smart phone ,the initial password is:123456789
4).Install the “smart Bell”apps to your smart phone and start up the Apps.
5).Press the“+”button from the upper-left corner of the APP to add one new wifi doorbell
6).Press SEARCH button ,and the screen will pop out the searched DOORBELL ID,select the searched,the APP will fill the BELL ID automatically ,and then press DONE to finish adding new bell,the new BELL and it’s status(Online)
7).Press the“setting ICON”from the APPS
8).And then press WIFI SETTING to select your house’s WIFI hot point ID and then enter your house’s WIFI’s pin
9).Press the“Done”button to finish wifi setting setting and then the WIFI video door phone will restart to save the setting.

Operation--SETTING
1).White List setting-Allow customer to add more phone to connect with the wifi door bell(Up to connect 8 pcs of mobile phone)
2).Interface setting:Used to define extended IO control
3).Alarm setting :Used to switch on/off the motion detecting alarn
4).Lock setting:Used to control and set the electronic lock
5).Equipment time setting :Used setting the device time and date
6).WIFI setting:Used to configure the device wifi network

Operation--Indoor bell pairing(optional)
If you bought the indoor music bell together with the wifi door bell,you need to pair the wifi doorbell with the indoor bell as below:
1).After you power up the doorbell and wait for 30s the doorbell alert:welcome to smart home
2).Then wait for 20s the blue light start flashing
3).Then press the music box’s volume button and holding it.
4)At the same time you press the doorbell button on the wifi door bell for few times,if paired ,the music box will ring DINGDONG,if not ,please redo step3&step 4

How to use
1).If any visitor press the Doorbell button,the product will directly Snapping a picture of the visitor and Apps in your phone will pop up a voice calling with the picture of the visitor.
2).You can answer the call to enjoy the real time voice and video chatting with the visitor .Just simply press the “TALK”icon from the APP,and also take photo/video of the visitor
3).If you have connected the electronic LOCK to the product ,you can even unlock the door.
4).If you missed the callings, you can check the visitors’s record from the main page off the APP